Equestrian

REPAIRING THE COVER/PROTECTION OF YOUR HORSE

This excellent glue will allow you to effectively and permanently repair holes or tears in your horse's rug.
Why spend your money on an expensive repair when you can do it yourself for next to nothing.
This glue forms a hard film during the repair, adheres to almost any fabric and when dry remains completely flexible, waterproof and abrasion resistant.

In order to carry out the repair:
Glue a piece of tape to the outside of the cover to keep the two pieces together. Turn the cover over and apply the glue to the tear (inner side). Leave to dry overnight (10 to 12 hours) then remove the adhesive tape.
And voila, you've just effectively repaired your cover, without any effort!

You can repair almost anything with Stormsure, whether it's a small hole or a larger tear.
You can also use this product to repair leaks, holes and tears on waterproof clothing, backpacks, tents, wellington, leather boots, shoes and much more.
When the glue dries, it remains completely flexible and can also be used to fill all kinds of holes effectively.
Once dry, Stormsure glue remains totally soft and flexible.
It is used by many equestrian centres throughout Europe and America.

Stormsure Flexible Repair Adhesive is a very strong general purpose adhesive and it can also be used as a surface sealant. It exhibits special characteristics unlike many adhesives as it is highly flexible and stretchy after it has cured but it remains very strong. It fills gaps well, it is suitable for use indoors and outdoors and in marine environments. The adhesive can be painted on top of a surface to make it waterproof, airtight or abrasion resistant. Stormsure adhesive can often be used to cover holes without a patch. A thick film of adhesive will make a good repair. If the glue will drip through the hole just place some sticky tape behind the hole before applying the glue. It can be removed once the glue has cured.

Stormsure Flexible Repair Adhesive bonds to virtually all surfaces including neoprene, rubber, leather, PVC, polyurethane, breathable and coated fabrics, wood, metal and more. It is ideal for repairing cracks in rubber wellington boots, hiking boots, loose soles, leaks in waders, rips in wetsuits, damaged horse rugs, holes in tents and canopies, leaks and splits inflatable items and many other items too. It can also be used for repairs to woodwork and furniture, roof tiles and concrete. 
A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc!
Comes with disposable gloves.

DIRECTIONS:
Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours.
TIPS:
Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap.
Store partly-used tubes in a deep freezer.

Adding a highly durable layer of water resistance on breathable fabrics, Gore-Tex® and regular rip stop nylon. Also works on fleeces and wool clothing. This large capacity is best suited for distributing into smaller containers or in industrial & manufacturing settings.

Adding a highly durable layer of water resistance on breathable fabrics, Gore-Tex® and regular rip stop nylon. Also works on fleeces and wool clothing. This large capacity is best suited for distributing into smaller containers or in industrial & manufacturing settings.

Adding a highly durable layer of water resistance on breathable fabrics, Gore-Tex® and regular rip stop nylon. Also works on fleeces and wool clothing. This large capacity is best suited for distributing into smaller containers or in industrial & manufacturing settings.

Adding a highly durable layer of water resistance on breathable fabrics, Gore-Tex® and regular rip stop nylon. Also works on fleeces and wool clothing. This large capacity is best suited for distributing into smaller containers or in industrial & manufacturing settings.

General mintenance kit for repairing all types of outdoor clothing and footwear.

This unique repair kit comes in a very convnient bag with clip, perfect for outdoor expditions.

This selection of very special adhesive glue, tape, oil and shampoo are one of the few products that can repair leaks, cracks and rips on all coats, trousers, gloves, hats, suits, goggles, glasses, boots, shoes and trainers and many more!
Repairs are permanent, strong, waterproof, flexible and resistant to abrasion (weather and water abrasion).

You don't need to buy new, repair your favourite items with this selection Stormsure products. You can plug the hole or patch the tear or clean materials with this excellent product.

Stormsure Flexible Repair Adhesive is a very strong general purpose adhesive and it can also be used as a surface sealant. It exhibits special characteristics unlike many adhesives as it is highly flexible and stretchy after it has cured but it remains very strong. It fills gaps well, it is suitable for use indoors and outdoors and in marine environments. The adhesive can be painted on top of a surface to make it waterproof, airtight or abrasion resistant. Stormsure adhesive can often be used to cover holes without a patch. A thick film of adhesive will make a good repair. If the glue will drip through the hole just place some sticky tape behind the hole before applying the glue. It can be removed once the glue has cured.

Stormsure Flexible Repair Adhesive bonds to virtually all surfaces including neoprene, rubber, leather, PVC, polyurethane, breathable and coated fabrics, wood, metal and more. It is ideal for repairing cracks in rubber wellington boots, hiking boots, loose soles, leaks in waders, rips in wetsuits, damaged horse rugs, holes in tents and canopies, leaks and splits inflatable items and many other items too. It can also be used for repairs to woodwork and furniture, roof tiles and concrete. 
A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc!
Comes with disposable gloves.

DIRECTIONS:
Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours.
TIPS:
Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap.
Store partly-used tubes in a deep freezer.

Pack of 4 colours - Clear • Black • Khaki • White

Stormsure Flexible Repair Adhesive is a very strong general purpose adhesive and it can also be used as a surface sealant. It exhibits special characteristics unlike many adhesives as it is highly flexible and stretchy after it has cured but it remains very strong. It fills gaps well, it is suitable for use indoors and outdoors and in marine environments. The adhesive can be painted on top of a surface to make it waterproof, airtight or abrasion resistant. Stormsure adhesive can often be used to cover holes without a patch. A thick film of adhesive will make a good repair. If the glue will drip through the hole just place some sticky tape behind the hole before applying the glue. It can be removed once the glue has cured.

Stormsure Flexible Repair Adhesive bonds to virtually all surfaces including neoprene, rubber, leather, PVC, polyurethane, breathable and coated fabrics, wood, metal and more. It is ideal for repairing cracks in rubber wellington boots, hiking boots, loose soles, leaks in waders, rips in wetsuits, damaged horse rugs, holes in tents and canopies, leaks and splits inflatable items and many other items too. It can also be used for repairs to woodwork and furniture, roof tiles and concrete. 
A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc!
Comes with disposable gloves.

DIRECTIONS: Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours.

TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before use again.

NOW COMES IN KHAKI!

Stormsure Flexible Repair Adhesive is a very strong general purpose adhesive and it can also be used as a surface sealant. It exhibits special characteristics unlike many adhesives as it is highly flexible and stretchy after it has cured but it remains very strong. It fills gaps well, it is suitable for use indoors and outdoors and in marine environments. The adhesive can be painted on top of a surface to make it waterproof, airtight or abrasion resistant. Stormsure adhesive can often be used to cover holes without a patch. A thick film of adhesive will make a good repair. If the glue will drip through the hole just place some sticky tape behind the hole before applying the glue. It can be removed once the glue has cured.

Stormsure Flexible Repair Adhesive bonds to virtually all surfaces including neoprene, rubber, leather, PVC, polyurethane, breathable and coated fabrics, wood, metal and more. It is ideal for repairing cracks in rubber wellington boots, hiking boots, loose soles, leaks in waders, rips in wetsuits, damaged horse rugs, holes in tents and canopies, leaks and splits inflatable items and many other items too. It can also be used for repairs to woodwork and furniture, roof tiles and concrete. 
A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc!
Comes with disposable gloves.

DIRECTIONS: Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours.

TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before use again.

Waterproof Flexible Repair Adhesive

MULTI PURPOSE

Directions

Clean damaged area. Apply glue directly over the damage as a layer. In case of two components having come apart (such as loose soles), apply glue to both sides and keep pressed together until cured. Glue remains flexible when cured. Full cure takes 12 hours. Clear and suitable for all colours. Suitable for canvas, leather, nubuck, synthetic materials, polyester, nylon, rubber and more. Perfect for your favourite training shoes.