Home & Garden

Stormsure’s repair kits are all-in-one packs containing carefully selected contents that enable you to easily make reliable and long-lasting repairs to the respective type of item or piece of equipment.

DIRECTIONS

For instant repairs to punctures and splits on generally flat surfaces, clean the surface and apply a TUFF Tape patch or strip directly onto the damage. Rub with a smooth, hard object to ensure best adhesion and least air under the patch. 

For damage in awkward or hard to reach areas, clean the damaged are (sand for best results) and apply Stormsure Flexible Repair Adhesive directly onto the damage, leaving a 5mm excess overlapping around it. Leave flat and allow to cure for 10-12 hours.

TIPS

Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap. Store partly used tubes in a freezer. 

Cements almost anything to anything.

Waterproofs and insulates.

Never becomes brittle.

Bonds plastic, crockery, wood, metal, tile, cork, china, fabric, and others.

A great alternative to Neoprene Queen, works just as well.

Aquaprene Contact Adhesive is a fast-curing, thick, black glue. Its premium quality and properties make it perfect for repairing wetsuit and drysuit damage that regularly occurs over time with regular use. This great adhesive will enable you to make easy and durable repairs to neoprene rips, roles, leaks and split seams on wetsuit and drysuit material. 

To use, apply to both edges of a rip and bond firmly together for 20 seconds. Within 5 minutes, it should be touch dry and you will be ready to go back in the water!

An essential tool for divers, anglers, surfers, body boarders, kite surfers and sailors.

Perfect for casual watersports enthusiasts as well as professional triathletes who want to stand out.

Bonds on contact.

Dries Fast and stays Flexible.

Waterproof.

No clamping required.

Amber in colour.

50m roll of nylon tape with hot melt adhesive on the back.

Model name: T-2000X

Size: 22mm x 50m

Colour: Dark grey

Directions: Seal into position with a hot iron to cover glued and stitched seams on wetsuits and dry suits, for a perfect finish.

1m strip of nylon tape with hot melt adhesive on the back.

Model name: T-2000X

Size: 22mm x 1m

Colour: Dark grey

Directions: Seal into position with a hot iron to cover glued and stitched seams on wetsuits and dry suits, for a perfect finish.

Any length Available up to 50m

For repairing small holes and rips in trampolines.

Waterproof • Durable • Clear • Non Flammable

Directions

Clean around the damaged area. For small holes, apply a thick film (1.5mm) of glue over the damaged surface plus an extra 10mm around it and leave to cure. To fix holes larger than 5mm, cover the underside of the hole with sticky tape. Apply the glue over the top surface as a thick film. (The tape holds the glue in place as it cures.) After it has cured, remove the tape and apply another thick film of glue on the underside. Always glue up to 10mm beyond the edges of the hole. Leave for 24 hours for a full cure.

Perfect for repairing your trampoline!

J-B Mini Clear Epoxy Syringe Contains 6 Ml Of Clear Epoxy And Sets In Five Minutes And Cures In 2-3 Hours.

• Adheres to metal, wood, tile, ceramic glass and china
• 1 time use
• Sets five minutes
• Cures in 2-3 hours
• JB Weld Quality

Stormsure’s repair kits are all-in-one packs containing carefully selected contents that enable you to easily make reliable and long-lasting repairs to the respective type of item or piece of equipment.

DIRECTIONS

For instant repairs to punctures and splits on generally flat surfaces, clean the surface and apply a TUFF Tape patch or strip directly onto the damage. Rub with a smooth, hard object to ensure best adhesion and least air under the patch. 

For damage in awkward or hard to reach areas, clean the damaged are (sand for best results) and apply Stormsure Flexible Repair Adhesive directly onto the damage, leaving a 5mm excess overlapping around it. Leave flat and allow to cure for 10-12 hours.

TIPS

Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap. Store partly used tubes in a freezer. 

A versatile tape coated with strong adhesive on both sides, easy to tear and special backing paper makes application easier. Ideal for mounting displays, crafts, and more.

Clear and water resistant

Forms extra strong bond

Hard Plastics Clear Adhesive bonds PVC-U, ABS and High Impact Polystyrene as well as clear plastics and other materials

Quick and easy mounting for your display materials, signs and charts from Sellotape

Quick, easy to use fasteners.

Reusable thousands of times without loss of grip.

Waterproof Flexible Repair Adhesive

MULTI PURPOSE

Directions

Clean damaged area. Apply glue directly over the damage as a layer. In case of two components having come apart (such as loose soles), apply glue to both sides and keep pressed together until cured. Glue remains flexible when cured. Full cure takes 12 hours. Clear and suitable for all colours. Suitable for canvas, leather, nubuck, synthetic materials, polyester, nylon, rubber and more. Perfect for your favourite training shoes.

This is a very fast setting epoxy resin. It is a light yellow colour when cured. 

Strength measured at 2000 psi.

Mix the two component and place the resin where it is needed.

It cures in 90 seconds in household conditions.

Positioning time about 60 seconds. 

This repair putty is a two part mix application of wood filler and body filler. For exterior and interior use, this polyester-resin based putty fills cracks and voids, which makes it especially suitable for painting. Wood Restore Repair Putty dries quickly and can be painted within one hour after application.

Remember to remove all rotten material first. If the putty is likely to sag on a vertical surface, apply more than one thinner layer on top of another until the durface is where you want it to be.

Discount - Damaged packaging

30 Minute delayed setting epoxy.

2000psi Strength.

Best for when extra positioning time is required.

Cure colour is light yellow.

Packaging is slightly damaged. Product is still in perfect condition.

MULTI PURPOSE

A synthetic rubber glue which sticks to many surfaces. Cures in 6-10 hours. Non Flammable, Waterproof and abrasion resistant.

Directions

Clean damaged area. Apply glue directly over the damage as a layer. In case of two components having come apart (such as loose soles), apply glue to both sides and keep pressed together until cured. Glue remains flexible when cured. Full cure takes 12 hours. Clear and suitable for all colours. 

A two part, rapid curing, clear, general purpose epoxy. Better on more rigid materials. May also be used as a metal filler and to restore rotten wood. Apply mixed epoxy directly to your repair. The Flow-Mix® nozzles automatically mixes resin and hardener together. 

Devcon Flow-Mix 2 Ton Epoxy is a clear, extremely strong, non-shrinking adhesive, specially formulated for high-clarity and good impact strength.

The flow-mix nozzles automatically mix the resin and hardener together.

For best results, pull plunger back slightly (1/8”) to allow air bubbles to rise to the top so that you do not push air bubbles into the Flow-Mix nozzle. To get an even flow of resin and hardener, push down evenly on the plunger.

Apply the thoroughly mixed epoxy directly to your repair. It is good to place removable tape on the surrounding areas or surfaces that you do not want to get epoxy on. Before the epoxy cures, remove the tape.

Bonds acrylic, china, fiberglass, metal, wood, concrete, ceramic, and glass with a tensile strength of 2500 PSI. Waterproof, with a Temperature Range of -40 degrees Fahrenheit to 200 degrees Fahrenheit.

A two part high strength cold weld epoxy that makes and easy alternative to welding or soldering.  The cured resin can be drilled, tapped, machined, sanded and painted. 

Comes with mixing tube.

BLACK AIR BRUSH BRAIDED HOSE WITH 1/8" BSP

1/8" SWIVEL FITTING AIR BRUSH RUBBER

BRAIDED AIR HOSE 3 METRE.
This braided air hose is supplied with the fittings necessary to connect to all Iwata airbrushes and the EW-440 / bd-128p / bd-132 and many, many more (all apart from the tiny 5mm badger fitting).
The hose connects directly to the airbrush one end with a 1/8" BSP - 1/8" BSP swivel nut.
The other nut is for connection to your compressor or air supply.

Super Glue twin pack.

Super fast. Bonds in seconds.

Use on most non-porous surfaces.

• Perfect for repairing appliances and tools
• sets only in 5 minutes
• 28.3g