Stormoprene

A general use adhesive in a fairly large tube. Now comes in stackable box with hang tab for retail display. Works on most materials like leather, wood, PVC, PU, Latex, etc. Widely used in the manufacturing and repair of shoes and footwear, waterproof and airtight items such as large inflatable boats (RIBS) and also felt wader soles.

This is the same high strength quick drying impact adhesive as used in the 2 part set. It can be used very effectively on most material as a single part.
You must mix with the part B for sticking Hypalon.

Perfect alternative to Evo-Stik 8000.

This adhesive is a conact adhesive: spread on to each of the sides to be stuck together and leave for 5 minutes until touch dry. Then press firmly together.

You can use just the glue (as a single component glue) on many fabrics, but the activator must be mixed with the adhesive when used to stick Hypalon fabric.

The glue is water proof and often used for making and repairing inflatable boats, RIBS and other marine craft.

These tins cannot be sent by Air Mail. It has to go by courier if you live outside the United Kingdom.

Choose Item SP70 instead.

Perfect alternative to Evo-Stik 8000.

This is a 5 litre tin of Stormoprene contact adhesive, and it comes with a 200ml bottle of activator. This adhesive is a contact adhesive: spread on to each of the sides to be stuck together and leave for 5 minutes until touch dry. Then press the two sides firmly together.

You can use just the glue (as a single component glue) on many fabrics, but the activator must be mixed with the adhesive when used to stick Hypalon fabric.

This adhesive is ideal for use on outdoor jobs. It is waterproof and resistant to UV deterioration.

Perfect alternative to Evo-Stik 8000.

Remove old seal. Cut seal to fit if needed. Apply two layers of Stormoprene glue onto both the drysuit/wetsuit and the area of the seal that will be stuck to the drysuit/wetsuit. Position drysuit seal area so that the seal can be stuck on comfortably. Bond and allow to cure for 2 hours. Full instructions are included.

Remove old seal. Cut seal to fit if needed. Apply two layers of Stormoprene glue onto both the drysuit/wetsuit and the area of the seal that will be stuck to the drysuit/wetsuit. Position drysuit seal area so that the seal can be stuck on comfortably. Bond and allow to cure for 2 hours. Full instructions are included.

Remove the old seal. Cut seal to fit if needed. Apply two layers of Stormoprene glue onto both the drysuit/wetsuit and the area of the seal that will be stuck to the drysuit/wetsuit. Leave the glue to become touch dry between each layer. Position drysuit seal area so that the seal can be stuck on comfortably. Bond, press firmly over the whole bonded area and . Bonding is instantaneaous, so arrange the poistioning very carefully first. Allow to cure for 2 hours. Full instructions are included.

This replacement kit is intended to provide a quick and effective replacement for broken or used ankle seals on a drysuit. Cone shaped. Remove old seal. Cut seal to fit if needed. Apply two layers of Stormoprene glue onto both the drysuit/wetsuit and the area of the seal that will be stuck to the drysuit/wetsuit. Position drysuit seal area so that the seal can be stuck on comfortably. Bond, press and allow to cure for 2 hours. Full instructions are included.